This is the gear for you if: Your gear has 1/2'' wide face plate (see illistration) and you have shoot bolts going into head of door and into foot off door and you have to manually lift lever up to engage the locking shoot bolt system. NOTE: this is for an inactive door only (there will be an exterior keyed cylinder on the door)
IMPORTANT: In order to choose the correct gear and extension you must print out the following PDF work sheet below, compare drawing to your gear to make sure identical, print off and fill out work sheet, and Return here to make your choices. Without work sheet complete you will not be able to make proper choices. With work sheet filled out complete it will be a breeze.
After completing worksheet , you can choose to purchase the gear only, or the gear with extensions.
You will choose this 36'' handle height manual shootbolt version gear is based on your faceplate width, your backset, your deadbolt throw, and middle extension length all of which are listed in the work sheet above If all your measurements are the same as above this it the gear you need. Also note these gears are sold in sets only which include the extensions. So you NEED to choose a top extension as well. Many gears fit multiple applications so your gear may require some job trimming on extensions which can be done simply with a hack saw. Please know what you are ordering as there are no returns. All prices include handling, packaging, and shipping to lower 48 states. Usually ships in 2-3 weeks.
HELPFUL HINTS: Click the link below to print out some helpful trouble shooting and installation support such as Active gear installation, Inactive gear installation, handle installation, Roller adjustments, instructions for changing the auto release system on roller style from Fuhr brand to Hoppe Brand, adjusting hinges , trimming extensions as well as other helpful hints
NOTE: You have the option above to either purchase the gear with the extensions, or just the gear alone. If you have the newer style stainless steel gear your existing extensions will work with this replacement, but if your gear is a Yellow Zinc Dichromate finish (goldish color finish that was put on old style steel gear ) you need to purchase the gear and any extensions offered. Please view the illustration above to see the color difference between the two styles of gears.